Тех. Помощь тут ==>>

[Судья Ди]

Повідомлення від Brabus

Не удается найти указаный файл

какой?

[Brabus]

Повідомлення від Судья Ди

какой?

тот шо драйвер

[Судья Ди]

Повідомлення від Brabus

тот шо драйвер

имя файла назови, да? может, он у меня как раз есть - тогда тут же и вышлю.

[Brabus]

Повідомлення від Судья Ди

имя файла назови, да? может, он у меня как раз есть - тогда тут же и вышлю.

файл у меня есть с файлом все в поряде раньше все работло как часы а щас

[Судья Ди]

Повідомлення від Brabus

файл у меня есть с файлом все в поряде

достал. кинь сюда содержимое .inf-файла (в каталоге с файлами драйвера) и список этих файлов.

[Brabus]

Повідомлення від Судья Ди

достал. кинь сюда содержимое .inf-файла (в каталоге с файлами драйвера) и список этих файлов.

;/************************************************** ******************************\
; ** Copyright(C) 1997-2004 Motorola. All rights reserved. **
; ** http://www.motorola.com **
; ** Installation file for the Motorola USB Driver **
; ** Products: SURFboard **
; ** **
; ** INF file version: 2.4.5.1 **
; ** Changes/additions: **
; ** This version added support SB5101 **
; ** **
;\************************************************ ********************************/

[version]
Signature = "$Chicago$"
Class = Net
ClassGUID = {4d36e972-e325-11ce-bfc1-08002be10318}
Provider = %MOT%
Compatible = 1 ; works with Win2K and Win9x
CatalogFile = netmotcm.cat
DriverVer=02/09/2004, 2.4.5.1

[Manufacturer]
%MOT% = MOTOROLA

[ControlFlags]
; Provides limited control on UI displays and events during installation.
; Must for any device on an enumerable BUS like USB
; Each PNP device should be included in this list
ExcludeFromSelect = \ ; blank for win95
USB\VID_07B2&PID_4100, \
USB\VID_07B2&PID_4200, \
USB\VID_07B2&PID_5100, \
USB\VID_07B2&PID_5101, \
USB\VID_07B2&PID_0900, \
USB\VID_07B2&PID_0950, \
USB\VID_07B2&PID_1000, \
USB\VID_07B2&PID_0100, \
USB\VID_07B2&PID_4500, \
USB\VID_07B2&PID_450b, \
USB\VID_07B2&PID_450e


[

[Brabus]

MOTOROLA]
; Models section - has an entry for each device installed by this file
; Display Name Section DeviceID
;_________________________________________________ ________________
%USB\VID_07B2&PID_4100.DeviceDesc% = ndisSB410.ndi, USB\VID_07B2&PID_4100
%USB\VID_07B2&PID_4200.DeviceDesc% = ndisSB420.ndi, USB\VID_07B2&PID_4200
%USB\VID_07B2&PID_5101.DeviceDesc% = ndisSB5101.ndi, USB\VID_07B2&PID_5101
%USB\VID_07B2&PID_5100.DeviceDesc% = ndisSB510.ndi, USB\VID_07B2&PID_5100
%USB\VID_07B2&PID_0900.DeviceDesc% = ndisSB900.ndi, USB\VID_07B2&PID_0900
%USB\VID_07B2&PID_0950.DeviceDesc% = ndisSB950.ndi, USB\VID_07B2&PID_0950
%USB\VID_07B2&PID_1000.DeviceDesc% = ndisSBG10.ndi, USB\VID_07B2&PID_1000
%USB\VID_07B2&PID_0100.DeviceDesc% = ndisSBV42.ndi, USB\VID_07B2&PID_0100
%USB\VID_07B2&PID_4500.DeviceDesc% = ndisCG450.ndi, USB\VID_07B2&PID_4500
%USB\VID_07B2&PID_450B.DeviceDesc% = ndisCG45b.ndi, USB\VID_07B2&PID_450b
%USB\VID_07B2&PID_450E.DeviceDesc% = ndisCG45e.ndi, USB\VID_07B2&PID_450e


;----------------------------------------------------------------------------
; Motorola SB4100 USB Cable Modem
;
[ndisSB410.id.reg]
; Win9x id registry sections
; These are not needed by NT
HKR, Ndi, DeviceID, 0, "USB\VID_07B2&PID_4100"

[ndisSB410.ndi]
; Windows 98 specific entry
AddReg = ndisSB410.id.reg, common.reg, ndiscm.flag.reg, ndiscm.9x.reg
DeviceID = "USB\VID_07B2&PID_4100"
CopyFiles = ndiscm.9x.CopyFiles

[ndisSB410.ndi.NT]
; Windows 2000 specific entry
Characteristics = 0x84 ; NCF_PHYSICAL | NCF_HAS_UI
BusType = 15 ; USB, or any other PNP bus
AddReg = common.reg, ndiscm.nt.reg ;
CopyFiles = ndiscm.nt.CopyFiles ;

[ndisSB410.ndi.nt.Services]
; Windows 2000 specific entry
AddService = ndiscm, 2, ndiscm.Service, common.EventLog


;----------------------------------------------------------------------------
; Motorola SB4200 USB Cable Modem
;
[ndisSB420.id.reg]
; Win9x id registry sections
; These are not needed by NT
HKR, Ndi, DeviceID, 0, "USB\VID_07B2&PID_4200"

[ndisSB420.ndi]
; Windows 98 specific entry
AddReg = ndisSB420.id.reg, common.reg, ndiscm.flag.reg, ndiscm.9x.reg
DeviceID = "USB\VID_07B2&PID_4200"
CopyFiles = ndiscm.9x.CopyFiles
;LogConfig = DefaultConfig

[ndisSB420.ndi.NT]
; Windows 2000 specific entry
Characteristics = 0x84 ; NCF_PHYSICAL | NCF_HAS_UI
BusType = 15 ; USB, or any other PNP bus
AddReg = common.reg, ndiscm.nt.reg ;
CopyFiles = ndiscm.nt.CopyFiles ;

[ndisSB420.ndi.nt.Services]
; Windows 2000 specific entry
AddService = ndiscm, 2, ndiscm.Service, common.EventLog


;----------------------------------------------------------------------------
; Motorola SB5100 USB Cable Modem
;
[ndisSB510.id.reg]
; Win9x id registry sections
; These are not needed by NT
HKR, Ndi, DeviceID, 0, "USB\VID_07B2&PID_5100"

[ndisSB510.ndi]
; Windows 98 specific entry
AddReg = ndisSB510.id.reg, common.reg, ndiscm.flag.reg, ndiscm.9x.reg
DeviceID = "USB\VID_07B2&PID_5100"
CopyFiles = ndiscm.9x.CopyFiles
;LogConfig = DefaultConfig

[ndisSB510.ndi.NT]
; Windows 2000 specific entry
Characteristics = 0x84 ; NCF_PHYSICAL | NCF_HAS_UI
BusType = 15 ; USB, or any other PNP bus
AddReg = common.reg, ndiscm.nt.reg ;
CopyFiles = ndiscm.nt.CopyFiles ;

[ndisSB510.ndi.nt.Services]
; Windows 2000 specific entry
AddService = ndiscm, 2, ndiscm.Service, common.EventLog

;----------------------------------------------------------------------------
; Motorola SB5101 USB Cable Modem
;
[ndisSB5101.id.reg]
; Win9x id registry sections
; These are not needed by NT
HKR, Ndi, DeviceID, 0, "USB\VID_07B2&PID_5101"

[ndisSB5101.ndi]
; Windows 98 specific entry
AddReg = ndisSB5101.id.reg, common.reg, ndiscm.flag.reg, ndiscm.9x.reg
DeviceID = "USB\VID_07B2&PID_5101"
CopyFiles = ndiscm.9x.CopyFiles
;LogConfig = DefaultConfig

[ndisSB5101.ndi.NT]
; Windows 2000 specific entry
Characteristics = 0x84 ; NCF_PHYSICAL | NCF_HAS_UI
BusType = 15 ; USB, or any other PNP bus
AddReg = common.reg, ndiscm.nt.reg ;
CopyFiles = ndiscm.nt.CopyFiles ;

[ndisSB5101.ndi.nt.Services]
; Windows 2000 specific entry
AddService = ndiscm, 2, ndiscm.Service, common.EventLog

;----------------------------------------------------------------------------
; Motorola SBG900 USB Cable Modem (Wireless Gateway)
;
[ndisSB900.id.reg]
; Win9x id registry sections
; These are not needed by NT
HKR, Ndi, DeviceID, 0, "USB\VID_07B2&PID_0900"

[ndisSB900.ndi]
; Windows 98 specific entry
AddReg = ndisSB900.id.reg, common.reg, ndiscm.flag.reg, ndiscm.9x.reg
DeviceID = "USB\VID_07B2&PID_0900"
CopyFiles = ndiscm.9x.CopyFiles
;LogConfig = DefaultConfig

[ndisSB900.ndi.NT]
; Windows 2000 specific entry
Characteristics = 0x84 ; NCF_PHYSICAL | NCF_HAS_UI
BusType = 15 ; USB, or any other PNP bus
AddReg = common.reg, ndiscm.nt.reg ;
CopyFiles = ndiscm.nt.CopyFiles ;

[ndisSB900.ndi.nt.Services]
; Windows 2000 specific entry
AddService = ndiscm, 2, ndiscm.Service, common.EventLog


;----------------------------------------------------------------------------
; Motorola SBG950 USB Cable Modem (Wireless Gateway)
;
[ndisSB950.id.reg]
; Win9x id registry sections
; These are not needed by NT
HKR, Ndi, DeviceID, 0, "USB\VID_07B2&PID_0950"

[ndisSB950.ndi]
; Windows 98 specific entry
AddReg = ndisSB950.id.reg, common.reg, ndiscm.flag.reg, ndiscm.9x.reg
DeviceID = "USB\VID_07B2&PID_0950"
CopyFiles = ndiscm.9x.CopyFiles
;LogConfig = DefaultConfig

[ndisSB950.ndi.NT]
; Windows 2000 specific entry
Characteristics = 0x84 ; NCF_PHYSICAL | NCF_HAS_UI
BusType = 15 ; USB, or any other PNP bus
AddReg = common.reg, ndiscm.nt.reg ;
CopyFiles = ndiscm.nt.CopyFiles ;

[ndisSB950.ndi.nt.Services]
; Windows 2000 specific entry
AddService = ndiscm, 2, ndiscm.Service, common.EventLog

[Brabus]

;----------------------------------------------------------------------------
; Motorola SBG1000 USB Cable Modem
;
[ndisSBG10.id.reg]
; Win9x id registry sections
; These are not needed by NT
HKR, Ndi, DeviceID, 0, "USB\VID_07B2&PID_1000"

[ndisSBG10.ndi]
; Windows 98 specific entry
AddReg = ndisSBG10.id.reg, common.reg, ndiscm.flag.reg, ndiscm.9x.reg
DeviceID = "USB\VID_07B2&PID_1000"
CopyFiles = ndiscm.9x.CopyFiles
;LogConfig = DefaultConfig

[ndisSBG10.ndi.NT]
; Windows 2000 specific entry
Characteristics = 0x84 ; NCF_PHYSICAL | NCF_HAS_UI
BusType = 15 ; USB, or any other PNP bus
AddReg = common.reg, ndiscm.nt.reg ;
CopyFiles = ndiscm.nt.CopyFiles ;

[ndisSBG10.ndi.nt.Services]
; Windows 2000 specific entry
AddService = ndiscm, 2, ndiscm.Service, common.EventLog


;----------------------------------------------------------------------------
; Motorola SBV4200 USB Cable Modem
;
[ndisSBV42.id.reg]
; Win9x id registry sections
; These are not needed by NT
HKR, Ndi, DeviceID, 0, "USB\VID_07B2&PID_0100"

[ndisSBV42.ndi]
; Windows 98 specific entry
AddReg = ndisSBV42.id.reg, common.reg, ndiscm.flag.reg, ndiscm.9x.reg
DeviceID = "USB\VID_07B2&PID_0100"
CopyFiles = ndiscm.9x.CopyFiles
;LogConfig = DefaultConfig

[ndisSBV42.ndi.NT]
; Windows 2000 specific entry
Characteristics = 0x84 ; NCF_PHYSICAL | NCF_HAS_UI
BusType = 15 ; USB, or any other PNP bus
AddReg = common.reg, ndiscm.nt.reg ;
CopyFiles = ndiscm.nt.CopyFiles ;

[ndisSBV42.ndi.nt.Services]
; Windows 2000 specific entry
AddService = ndiscm, 2, ndiscm.Service, common.EventLog


;----------------------------------------------------------------------------
; Motorola CG4500 USB Cable Modem
;
[ndisCG450.ndi]
; Windows 9x specific entry
AddReg = ndisCG450.id.reg, common.reg, ndiscm.flag.reg, ndiscm.9x.reg
DeviceID = "USB\VID_07B2&PID_4500"
CopyFiles = ndiscm.9x.CopyFiles
;LogConfig = DefaultConfig

[ndisCG450.ndi.NT]
; Windows NT specific entry
Characteristics = 0x84 ; NCF_PHYSICAL | NCF_HAS_UI
BusType = 15 ; USB, or any other PNP bus
AddReg = common.reg, ndiscm.nt.reg ;
CopyFiles = ndiscm.nt.CopyFiles ;

[ndisCG450.ndi.nt.Services]
; Windows NT specific entry
AddService = ndiscm, 2, ndiscm.Service, common.EventLog

[ndisCG450.id.reg]
; Win9x id registry sections
; These are not needed by NT
HKR, Ndi, DeviceID, 0, "USB\VID_07B2&PID_4500"

;----------------------------------------------------------------------------
; Motorola CG4501 USB Cable Modem
;
[ndisCG45b.ndi]
; Windows 9x specific entry
AddReg = ndisCG45b.id.reg, common.reg, ndiscm.flag.reg, ndiscm.9x.reg
DeviceID = "USB\VID_07B2&PID_450b"
CopyFiles = ndiscm.9x.CopyFiles
;LogConfig = DefaultConfig

[ndisCG45b.ndi.NT]
; Windows NT specific entry
Characteristics = 0x84 ; NCF_PHYSICAL | NCF_HAS_UI
BusType = 15 ; USB, or any other PNP bus
AddReg = common.reg, ndiscm.nt.reg ;
CopyFiles = ndiscm.nt.CopyFiles ;

[ndisCG45b.ndi.nt.Services]
; Windows NT specific entry
AddService = ndiscm, 2, ndiscm.Service, common.EventLog

[ndisCG45b.id.reg]
; Win9x id registry sections
; These are not needed by NT
HKR, Ndi, DeviceID, 0, "USB\VID_07B2&PID_450b"

;----------------------------------------------------------------------------
; Motorola CG4500E USB Cable Modem
;
[ndisCG45e.ndi]
; Windows 9x specific entry
AddReg = ndisCG45e.id.reg, common.reg, ndiscm.flag.reg, ndiscm.9x.reg
DeviceID = "USB\VID_07B2&PID_450e"
CopyFiles = ndiscm.9x.CopyFiles
;LogConfig = DefaultConfig

[ndisCG45e.ndi.NT]
; Windows NT specific entry
Characteristics = 0x84 ; NCF_PHYSICAL | NCF_HAS_UI
BusType = 15 ; USB, or any other PNP bus
AddReg = common.reg, ndiscm.nt.reg ;
CopyFiles = ndiscm.nt.CopyFiles ;

[ndisCG45e.ndi.nt.Services]
; Windows NT specific entry
AddService = ndiscm, 2, ndiscm.Service, common.EventLog

[ndisCG45e.id.reg]
; Win9x id registry sections
; These are not needed by NT
HKR, Ndi, DeviceID, 0, "USB\VID_07B2&PID_450e"

;-----------------------------------------------------------------------------
; common registry entries
;
[common.reg]
HKR, Ndi\params\ByteSwapFlag, ParamDesc, 0, "Byte Swap Flag"
HKR, Ndi\params\ByteSwapFlag, default, 0, "ByteSwapFlag=0"
HKR, Ndi\params\ByteSwapFlag, type, 0, "edit"
HKR, Ndi\params\ByteSwapFlag, LimitText, 0, "128"
HKR, Ndi\params\ByteSwapFlag, UpperCase, 0, "0"

;----------------------------------------------------------------------------
; Win9x specific
;
[ndiscm.flag.reg]
; flag is not needed by NT
HKR, Ndi\params\ByteSwapFlag, flag, 1, 20,00,00,00

[ndiscm.9x.reg]
HKR, , DevLoader, 0, "*ndis"
HKR, , DeviceVxDs, 0, "NetMotCM.sys"
HKR, , EnumPropPages, 0, "netdi.dll,EnumPropPages"
; memphis appears to not support the ndis5 upper range, so use ndis3
HKR, Ndi\Interfaces,DefUpper, 0, "ndis3"
HKR, Ndi\Interfaces,DefLower, 0, "ethernet"
HKR, Ndi\Interfaces,UpperRange, 0, "ndis3"
HKR, Ndi\Interfaces,LowerRange, 0, "ethernet"
HKR, NDIS, LogDriverName, 0, "NetMotCM"
HKR, NDIS, MajorNdisVersion, 1, 03
HKR, NDIS, MinorNdisVersion, 1, 0A

;-----------------------------------------------------------------------------
; WIN2K (NT) specific
;
[ndiscm.nt.reg]
HKR, Ndi, Service, 0, "ndiscm"
; use ndis5 as the upper bound because NT supports it
HKR, Ndi\Interfaces, DefUpper, 0, "ndis5"
HKR, Ndi\Interfaces, DefLower, 0, "ethernet"
HKR, Ndi\Interfaces, UpperRange, 0, "ndis5"
HKR, Ndi\Interfaces, LowerRange, 0, "ethernet"

[ndiscm.Service]
DisplayName = %ndiscm.Service.DispName%
ServiceType = 1 ;%SERVICE_KERNEL_DRIVER%
StartType = 3 ;%SERVICE_DEMAND_START%
ErrorControl = 1 ;%SERVICE_ERROR_NORMAL%
ServiceBinary = %12NetMotCM.sys
LoadOrderGroup = NDIS
AddReg = TextModeFlags.reg

[common.EventLog]
AddReg = common.AddEventLog.reg

[common.AddEventLog.reg]
HKR, , EventMessageFile, 0x00020000, %%SystemRoot%System32\netevent.dll
HKR, , TypesSupported, 0x00010001, 7

[TextModeFlags.reg]
HKR, , TextModeFlags, 0x00010001, 0x0001


;-----------------------------------------------------------------------------
; Files and Destination Directories
;
[ndiscm.nt.CopyFiles]
NetMotCM.sys,,,2

[ndiscm.9x.CopyFiles]
NetMotCM.sys,,,2

[DestinationDirs]
DefaultDestDir = 10,System32\Drivers
ndiscm.nt.CopyFiles = 12
ndiscm.9x.CopyFiles = 11

[SourceDisksNames]
1 = %USBCM%,,,

[SourceDisksFiles]
NetMotCM.sys = 1

[Strings]
MOT = "Motorola"
USBCM = "USBCM"
; String that gets displayed while installing the device
; ndiscm.DeviceDesc = "Motorola SURFboard USB Cable Modem"
USB\VID_07B2&PID_4100.DeviceDesc = "Motorola SURFboard 4100 USB Cable Modem"
USB\VID_07B2&PID_4200.DeviceDesc = "Motorola SURFboard 4200 USB Cable Modem"
USB\VID_07B2&PID_5100.DeviceDesc = "Motorola SURFboard SB5100 USB Cable Modem"
USB\VID_07B2&PID_5101.DeviceDesc = "Motorola SURFboard SB5101 USB Cable Modem"
USB\VID_07B2&PID_0900.DeviceDesc = "Motorola SURFboard USB Gateway"
USB\VID_07B2&PID_0950.DeviceDesc = "Motorola SURFboard SBG950 USB Gateway"
USB\VID_07B2&PID_1000.DeviceDesc = "Motorola SURFboard SBG1000 USB Gateway"
USB\VID_07B2&PID_0100.DeviceDesc = "Motorola SURFboard Voice over IP Cable Modem"
USB\VID_07B2&PID_4500.DeviceDesc = "Motorola CG4500 Communications Gateway"
USB\VID_07B2&PID_450B.DeviceDesc = "Motorola CG4501 Communications Gateway"
USB\VID_07B2&PID_450E.DeviceDesc = "Motorola CG4500E Communications Gateway"

; NT Service name
ndiscm.Service.DispName = "Motorola SURFboard USB Cable Modem Windows Driver"

[Судья Ди]

ага. файл "NetMotCM.sys" рядом с .inf'ом есть?

[Brabus]

спс всем за помощ))))))))))))))))

все впорядке))))))))0